投加颗粒活性炭和二氧化锰对剩余污泥厌氧消化的影响

厌氧系统添加碳和金属纳米材料是强化厌氧消化的有效策略.为考察投加GAC和MnO₂对剩余污泥厌氧消化过程的影响,设置了空白组（R0）、GAC组（R1）、MnO₂组（R2）以及GAC/MnO₂组（R3）4组间歇实验,研究GAC和MnO₂的投加对剩余污泥厌氧消化效率、微生物活性和微生物群落结构的影响.结果表明,反应器运行28 d后,与R0相比,R1和R3的产CH₄速率分别提高了68.18%和51.35%,R2的产CH₄量降低了21.25%.GAC和MnO₂的单独或者混合投加,对厌氧发酵过程均有促进作用.Mn²⁺与剩余污泥释放的磷酸盐生成磷酸盐沉淀对厌氧代谢通道的阻塞作用,造成R2产CH₄效率变低.GAC优良导电性、吸附能力和MnO₂/Mn²⁺的催化作用是R3产CH₄效率增强的主要原因.正常代谢条件下,投加GAC、MnO₂和GAC/MnO₂均可以提高污泥厌氧消化系统微生物活性.微生物群落分析表明,GAC和MnO₂促进了产甲烷菌Methanobacterium和Methanosaeta的富集,强化了发酵细菌和产甲烷菌的种间电子传递,促进了剩余污泥厌氧发酵过程和CH₄的产生.     

Modeling the current-voltage characteristics of thin-film silicon solar cells based on photo-induced electron transfer processes

Power conversion efficiency of p-i-n type microcrystalline silicon (c-Si:H) solar cells has been analyzed in terms of sequential processes of photo-induced electron transfer. The effect of the excitonic state on the charged carrier generation has been studied compared to a conventional scheme in which only charged carriers are taken into account for the operation of the solar cells. A numerical model has been developed to calculate current-voltage characteristics of solar cells on the basis of two types of charged carrier generation processes (exciton process and charged carrier process). The light trapping effect due to a textured back surface reflector (BSR) was embedded in the numerical model by using the effective medium theory in combination with the matrix method in the field of the electromagnetic theory of light. As an application of this modeling, it was found that the reported data of the power conversion efficiency were not explained by the conventional charged carrier process model and that the combined model of the charged carrier process with the exciton process well explains the performance of the p-i-n type c-Si:H solar cells. In this way, the typical power conversion efficiencies were estimated to be 10.5% for the device (i-layer thickness: 1.8 m) with the BSR (period: 600 nm; height: 250 nm) and 8.6% for the device with the flat reflector under the condition that the fractions of the exciton process and charged carrier process were 60% and 40%, respectively.     

Modeling the current-voltage characteristics of thin-film silicon solar cells based on photo-induced electron transfer processes

Power conversion efficiency of p-i-n type macrocrystalline silicon (µc-Si:H) solar cells has been analyzed in terms of sequential processes of photo-induced electron transfer. The effect of the excitonic state on the charged carrier generation has been studied compared to a conventional scheme in which only charged carriers are taken into account for the operation of the solar cells. A numerical model has been developed to calculate current-voltage characteristics of solar cells on the basis of two types of charged carrier generation processes (exciton process and charged carrier process). The light trapping effect due to a textured back surface reflector (BSR) was embedded in the numerical model by using the effective medium theory in combination with the matrix method in the field of the electromagnetic theory of light. As an application of this modeling, it was found that the reported data of the power conversion efficiency were not explained by the conventional charged carrier process model and that the combined model of the charged carrier process with the exciton process well explains the performance of the p-i-n type μc-Si:H solar cells. In this way, the typical power conversion efficiencies were estimated to be 10.5% for the device (i-layer thickness: 1.8 μm) with the BSR (period: 600 nm; height: 250 nm) and 8.6% for the device with the flat reflector under the condition that the fractions of the exciton process and charged carrier process were 60% and 40%, respectively.     

硫自养反硝化系统运行效能和微生物群落结构研究

启动了单质硫自养反硝化反应器并研究其脱氮性能,通过血清瓶批式实验测定了污泥的反硝化活性,并采用扫描电镜和高通量测序手段揭示了系统内微生物群落结构特征.结果表明,SBR反应器进水NO₃^--N浓度为80mg/L,随水力停留时间由12h逐渐缩短为6h,反应器的自养脱氮性能逐渐增强,稳定期反应器的总无机氮去除率达99.1%,总无机氮去除负荷平均值为0.158kg N/（m³·d）;SBR周期内NO₂^--N浓度最大值为13.3mg/L,NO₃^--N还原为NO₂^--N过程pH值由7.38降低至6.94,NO₂^--N还原为N₂过程pH值基本不变;批式实验结果表明,硫自养反硝化和异养反硝化NO₃^--N去除速率分别为0.515,0.196kg N/（kg VSS·d）,硫自养反硝化污泥NO₂^--N降解速率为0.117kg N/（kg VSS·d）,污泥同时具有自养反硝化和异养反硝化活性;扫描电镜显示,污泥中存在大量的杆状细菌和球状菌;污泥中主要的硫反硝化细菌分别为Thiobacillus、Sulfurimonas和Thermomonas属,其相对丰度分别为14.5%、7.6%和6.0%.     

剩余污泥与餐厨垃圾协同厌氧消化研究进展

为了推进污水厂剩余污泥与餐厨垃圾协同厌氧消化在工程规模中的应用,提高其能源回收率,系统分析了协同厌氧消化机制、产物类型及其主要的影响因子,综述了协同厌氧消化中直接种间电子传递作用的重要研究进展,并展望了协同厌氧消化的未来研究方向,包括开发高效经济的原料预处理方式,表征基质降解特性,基于多组学联用技术理解微生物代谢调控,缓解消化体系中潜在抑制剂影响,原位耦联其他种类废弃物进一步提升消化性能和稳定性,以期为城镇有机固体废弃物的高效能源回收提供指导.     

京津冀水源涵养生态服务供体区与受体区范围的划分

京津冀水资源问题已经严重制约区域经济发展,定量分析研究区水源涵养生态服务供受关系,有助于深刻理解区域上下游之间的生态联系,促进区域生态公平,实现区域社会持续健康发展.利用降水储量法、水量平衡法及水源涵养生态服务供体区与受体区划分方法,分析2000-2010年京津冀净水源涵养量空间格局,划分研究区水源涵养生态服务供体区和受体区范围.结果表明:①冀北燕山山区净水源涵养量最高,年均值为65.24~81.35 mm,其次是冀西太行山山区,年均值为46.47~61.28 mm;净水源涵养量负值区主要分布在东部沿海和大中小城市,年均值为-130.46~-152.39 mm.②水源涵养生态服务供体区占研究区面积的41.42%,单位面积（m2,下同）平均净供水量为0.03~0.07 m3;水源涵养生态服务平衡区面积占25.01%;水源涵养生态服务受体区面积占33.57%,单位面积平均净需水量为0.18~0.41 m3,是供体区供水能力的6倍左右.③从流域来看,滦河流域的承德市为天津市、秦皇岛市及唐山市供应水资源,年均供水总量为23.7×108 m3;永定河流域的张家口市为北京市供应水资源,年均供水总量为5.3×108 m3;大清河流域的保定市为北京市及天津市西南部供应水资源,年均供水总量为8.2×108 m3;但子牙河流域和漳卫河流域供水能力严重不足.研究显示,燕山山区和太行山山区为水源涵养生态服务供体区,东部沿海和大中小城市为主要水源涵养生态服务受体区,水源涵养生态服务供体区净水源涵养能力不能满足水源涵养生态服务受体区需水量,整个研究区供受关系严重失衡.      

基于空间监视雷达散射回波的电离层电子密度探测方法

目的提高空间监视雷达的电离层电波环境适应性。方法 VHF-L波段大功率雷达信号经过电离层传播时会发生非相干散射,散射回波中包含电离层信息。结合雷达方程和电离层目标特征,基于电离层非相干散射原理,理论分析空间监视雷达用于电离层电子密度非相干散射探测的条件(包括雷达参数设置和波束扫描方式),给出电离层回波功率、自相关函数和电子密度表达式,利用Matlab编程对某大功率空间监视雷达原始数据处理得到电离层散射回波及电子密度。结果给出了空间监视雷达用于电离层电子密度非相干散射探测的基本条件,实测数据发现电离层回波和电子密度符合电离层变化特征。结论利用VHF-L波段大功率雷达空间散射回波探测电离层电子密度是可行的,为空间监视雷达电离层环境感知与传播自适应修正提供了一种可能的新途径。     

纳米铁锰氧化物对钒的吸附特性研究

为寻求处理土壤和地下水钒污染的吸附剂,采用模拟实验,开展了纳米铁锰氧化物(MnFe_2O_4)对五价钒(V~(5+))的吸附特征研究,分析了纳米铁锰氧化物浓度、pH值、时间、温度和初始钒浓度等因素对MnFe_2O_4吸附V~(5+)的影响,以揭示纳米铁锰氧化物的吸附动力学及热力学等特征,并通过扫描电镜(SEM)和红外光谱(IR)等表征方法分析了纳米铁锰氧化物吸附V~(5+)的机理.结果表明,在初始钒溶液为100 mg·L~(-1),MnFe_2O_4加入量为0.1 g,pH=4,温度为25℃的条件下,吸附过程在24 h达到平衡,且此条件下有最大吸附值和吸附率,分别为15.14 mg·g~(-1)和60.54%.纳米铁锰氧化物吸附钒的动力学过程符合伪二级动力学模型,等温吸附线符合Langmuir模型.热力学研究表明,升高温度有利于吸附,吸附过程为吸热过程.由扫描电镜结果可知,纳米铁锰氧化物有较大的比表面积,可提供较多的活性位点.因此,纳米铁锰氧化物可作为一种吸附材料用于钒污染废水处理.     

氯酚溶液的γ辐照还原降解研究

氯酚由于氯取代基产生的诱导效应,使其容易受到亲核粒子的攻击而被还原降解.通过测定γ辐照前后氯酚母体、Cl-离子以及反应中间产物的浓度变化,研究了4种氯酚水溶液(4-CP、2-CP、2,4-DCP、2,4,6-TCP)与水合电子ea-q反应的降解脱氯过程.结果表明,在水合电子ea-q还原体系中,4种氯酚的降解脱氯顺序依次为:2,4,6-TCP>2,4-DCP>2-CP>4-CP,多氯酚比单氯酚容易降解脱氯,邻位上的氯原子要比对位上的氯原子更容易去除,苯酚和Cl-是氯酚反应降解的最终产物.另外,4种氯酚的降解和脱氯过程皆遵循一级反应动力学特征,4-CP、2-CP、2,4-DCP和2,4,6-TCP的降解反应常数分别是0.154、0.253、0.750和1.188 kGy-1,脱氯反应常数分别为0.137、0.219、0.251和0.306 kGy-1.     

氧化还原介体调控亚硝酸盐反硝化特性研究

采用实验室驯化的亚硝酸盐反硝化菌群作为菌种,优化亚硝酸盐降解条件,探究在氧化还原介体蒽醌-2-磺酸钠(AQS)存在条件下亚硝酸盐反硝化的特性.结果表明,反硝化菌群降解亚硝酸盐的最适条件为:温度35℃,pH为8,丁二酸钠为碳源,碳氮比4∶1,初始亚硝酸盐浓度100 mg.L-1;AQS的最佳投加量为0.16 mmol.L-1,介体调控的反硝化体系氧化还原电位略有降低,维持在-400～-500 mV之间,pH随亚硝酸盐降解速率增加而增大,最终稳定到9～10之间;通过分析反硝化中间代谢产物,推测AQS在亚硝酸盐反硝化过程中不仅起到辅酶CoQ的作用而且加速了细胞色素传递电子的全过程.本研究可为氧化还原介体调控亚硝酸盐反硝化实际应用提供理论基础和优化参数.